OPERATIONS
STARTING
When your refrigerator is first installed, allow it 3
-4
hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
BEFORE SETTING THE TEMPERATURE
●
The temperature of the refrigerator is kept constant regardless of changes in room temperature.
It is recommended that, once set, the temperature settings(the controls for the refrigerator and
freezer compartments) not be changed unless necessary.
●
This refrigerator has one temperature control button for the refrigerator compartment and one
temperature control dial for the freezer compartment.
●
●
●
This refrigerator has a temperature sensor in the refrigerator compartment. It will start and stop
the compressor automatically as
required to meet the target temperature set in the Refrigerator
DOOR ALARM
When the door of the refrigerator or the freezer is open for 1 minute, an alarm will sound three times
.
SELF TEST
●
Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas,
it will display an error code to assist the repair technician. While an error code is displayed, other
control and display functions will not operate.
●
If an error code is displayed, contact a service center. Do not disconnect the power cord from
the outlet.
CONTROLS FOR REFRIGERATOR COMPARTMENT
The default setting of the temperature control button for
the refrigerator compartment is NORMAL (middle LED).
To control the
refrigerator target
temperature, press the
REF.
TEMP CONTROL button.
Whenever
the button is pressed, the LED indicator will
increase accordingly.
This dial controls the air flow balance between the Freezer and Refrigerator compartment. it
does not control
the cycling of the compressor.
compartment.
cooling.
The temperature is set in 7 steps, from Cold to Coldest
15
The default setting of the temperature control button for the refrigerator compartment is Normal
(Middle LED).
(SOME MODELS)
the door remains open, the alarm will repeat every 30 seconds.
If
The default setting of the temperature control dial in the freezer compartment is '3 for type A
’
or '5’ for type B & C.
Summary of Contents for GT-427HPLE
Page 24: ...P No MFL69844944_Rev 01 ...
