28
EN
Water Dispenser Tank (Non
plumbed models only)
The water tank holds the water in which is to be
dispensed or used by the automatic ice maker
to make ice. Do not fill this tank with any other
liquid other than water. Doing so can damage
the water dispensing system.
1
Remove the water dispenser tank by pulling
it out while holding the handle.
2
Open the cover or cap of the water
dispenser tank.
3
Fill with bottle filtered or clean filtered water
up to the reference line indicated inside the
water dispenser tank. (Total capacity: 4 ℓ)
4
After filling with water, close the cover or
cap of the water dispenser tank.
5
Refit the water dispenser tank on the fridge
shelf.
CAUTION
•
Children should not be allowed near the
dispenser tank. If the child drops the water
dispenser tank while it is completely filled with
water, injury may occur. Do not fill the water
tank with drinks other than water or fill with
hot water.
•
Do not apply excessive force or impact when
removing or assembling the water dispenser
tank. Doing so can cause appliance damage
or injury.
NOTE
•
Before using the water dispenser tank after
installing the appliance, it should be washed
before filling it with water.
•
Check if the water dispenser tank has been
placed on the appliance correctly. If it is not
assembled correctly, water may leak from the
tank into the appliance.
•
If there is an insufficient amount of water in
the water dispenser tank, ice cube size and
quantity may be affected and may result in no
ice being made.
