manualshive.com logo in svg

LG GSA-5120D, Service Manual

Share
Download
LG GSA-5120D Service Manual Download Page 10

10

System meeting the following requirements is needed in order to use USB
2.0 operation with this drive.
•

Computer that is equipped with a USB 2.0 – compliant USB connector or
PCI adapter card, and on which the USB 2.0 EHCI (Enhanced Host
Controller Interface) driver software 

1)

has been installed.

1)

The USB 2.0 EHCI driver software is supplied with currently available PCI

adapter cards that conform to USB 2.0. Further, Microsoft has released the USB
2.0 EHCI driver software for Windows XP, therefore it is also possible to use this
driver software with Windows XP.
If you want to know in detail, please contact your USB 2.0 adapter dealer or consult
your PC manufacturer, or consult the Microsoft Corporation Web site.

•

To achieve maximum Record & Write speed your system may require
data to be copied first to the computer’s hard drive rather than directly
from another source disc or drive.

System requirements

Computer       

This unit can be operated in the system environment explained here.

Cautions

* Compatibility problem in write/read function may occur with some DVD+R Double

Layer media depending on the media manufacturing quality.

Pentium 4 2.8GHz or Higher with IBM PC or Compatible.

512MB of RAM or greater.

10GB or more free space. (The free space needed for writing
depends on the quantity of data.)

USB port or IEEE1394 port

For Software installation

Windows 2000 Professional/XP(Home Edition/ Professional), 
Direct X 9.0 or Higher is required.

CD-R : LG, Mitsubishi Chemical, Verbatim, Taiyo Yuden, TDK

or SKC discs are recommended.

CD-RW : LG, Ricoh, Mitsubishi Chemical, Verbatim discs are 

recommended.

DVD-R : Maxell, Taiyo Yuden, JVC are recommended.
DVD-RW : JVC, Mitsubishi Chemical, TDK are recommended.
DVD+R : Mitsubishi Chemical, Verbatim are recommended.
DVD+RW : TDK, FujiFilm, Ricoh are recommended.
DVD-RAM : Maxell, Panasonic are recommended.
DVD+R DL : Mitsubishi Chemical is recommended.

System 
requirements

Hard disk

Interface

CD-ROM drive

Software Required
OS

CD-R, CD-RW, 
DVD-R, DVD-RW,
DVD+R, DVD+RW,
DVD-RAM discs

CPU

Memory

Introduction

*  Compatibility problem in write/read function may occur with some DVD+R Double Layer

media, DVD-RW 6x and DVD+RW 8x media depending on the media manufacturing quality.

Summary of Contents for GSA-5120D













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands