LG GRL2187EP, Owner'S Manual

Page: 23 / 44

USING YOUR REFRIGERATOR
ADJUSTING THE TEMPERATURES
AND DISPLAY
Adjust Freezer Temperature
To adjust the temperature in the freezer
compartment, press the FREEZER button to
cycle through the the range of available settings.
Adjust Refrigerator Temperature
To adjust the temperature in the refrigerator
compartment, press the REFRIGERATOR button
to cycle through the range of available settings.
NOTE: The actual inner temperature varies
depending on the food status, since the indicated
temperature setting is the target temperature and
not the actual temperature within the refrigerator.
Initially set the REFRIGERATOR CONTROL at
3 degrees C and the FREEZER CONTROL at
-18 degrees C. Leave them at these setting for 24
hours (one day) to stabilize. Then adjust the
compartment temperature as illustrated above.
Display Power-Saving Mode
This function places the display into the Power-
Saving Mode.
• Simultaneously press the FREEZER and
EXPRESS FRZ. buttons and hold them for 5
seconds until a tone sounds.
• All LED lights will turn on and then off.
• When the Power-Saving Mode is activated, the
display will remain off until the next time the
door is opened. The display will also turn on
when any button is pressed, and it will remain
on for 20 seconds after the last door opening or
button selection.
• To deactivate the Power-Saving Mode, press
the FREEZER and EXPRESS FRZ. buttons
simultaneously and hold them for 5 seconds
until the tone sounds.
w CAUTION
Display mode setting and its cancellation
1. With the refrigerator door open, keep pressing
the REFRIGERATOR Button and EXPRESS
FRZ. Button more than 5 seconds, then it goes
to the display mode with Special Beep Sound
with special beep sound.
2. Perform the same way again to cancel the
display mode.
3. All freezing unit will be turned off at display
mode(Exceptions: Lamp, Display)
23
FREEZER
REFRIGERATOR
FREEZER
EXPRESS FRZ.
ENGLISH