20
Cover Cap
OPERATIONS
WATER DISPENSER (GR-T177IVDP)
• Put water after the water tank being in position. Necessarily separate the water tank to
clean it or not to use it.
• When the water tank is not in position after filling it with water, water can leak out by the
valve pushed.
Putting water in the water tank
1. Open the cover cap and pour water into the water
tank.
2. Close the cover cap.
1. Press the dispenser pad with cup.
2. The water is released when the dispenser pad is
pressed. The pad returns to its original position when
the cup is removed and the water stops its flow.
Disassembly
Lift the water tank, gripping a side and bottom of water
tank.
Note:
When disassemble Water Tank, use all water
inside dispenser first.
Assembly
If by some cause removes the water tank, place again the
water tank on its original position. Verify that the valve
assembly correctly in the hole of the door. Once
assembled push down and check the tank position with
line.
Drinking
w
w
CAUTION
Do not use anything other than water including.
Hot water needs to be cooled before being put in the water tank.
NOTE
line
down
Push
