manualshive.com logo in svg

LG GR-L258USJH, Owner'S Manual

Share
Download
LG GR-L258USJH Owner'S Manual Download Page 21

USING YOUR REFRIGERATOR

21

SETTING THE FUNCTIONS

Press the button for the desired function to view
and select other settings.

Setting The Dispenser Lock

Setting The Door Alarm

open for more than 60 seconds.The alarm stops
sounding when the door is closed. 
Press the ALARM/LOCK button once to activate
and deactivate the door alarm function.

NOTE:

Contact your local service center if the

alarm continues to sound after the doors are
closed.

Resetting The Filter Indicator

NOTE: 

It is recommended that you replace the

filter when the water filter indicator light reaches 0
or whenever the water or ice cube taste
deteriorates noticeably.

ACTIVATING ICE PLUS

The ICE PLUS function runs the freezer
compartment at the coldest setting for a 24-hour
period to increase icemaking by up to about 20%,
and then turns off automatically.

NOTE:

Press the button again to cancel 

the ICE PLUS function.

ALARM / LOCK 

3SECS

ALARM / LOCK 

3SECS

LIGHT / FILTER

ICE PLUS

Press and hold the
ALARM/LOCK button for
three seconds to lock the
dispenser and all of the
other control panel
functions. 

Press and hold again for 
3 seconds to unlock.

The ALARM/LOCK button
also controls the door
alarm that sounds three
times in 30-second
intervals when a
compartment door is left 

Press and hold the
LIGHT/FILTER button for
more than 3 seconds to
reset the filter indicator
after the water filter has
been replaced.

Press the ICE PLUS
button once to activate the
ICE PLUS function. The
ICE PLUS icon on the
display panel will
illuminate when activated.

Summary of Contents for GR-L258USJH











































Reviews:

No comments

Brands by name

Popular brands

Load more brands