Chapter 9. Cautions for disassembling the product
1. Main PWB assembly
• When disassembling the main PWB assembly, located
in the mechanical room, be careful so that the lead
wires do not touch the edge part.
• If the lead wire coating is disconnected or the coating is
damaged, it can cause a short circuit.
2. Frame assembly, display
• Using the - driver, open the slot between the frame
display and the case-U to disassemble the unit. At this
time, be careful not to apply too much pressure to
damage the PWB assembly, display or make scratches
on frame display and case-U.
g
Depending on the mode, the service slot is on the top
left/right side or bottom left/right side.
Cautions for disassembling the product
- 45 -
Case-U
Frame Display
Case-U
Deco, Case
Frame Display
GR-K24PS
GR-K243UG
