LG GR-F258 User Manual Download Page 8

Page: 8 / 34

REFRIGERATOR INSTALLATION

HOW TO REPLACE DOOR HANDLES

NOTE

: Handle appearance may vary

from illustrations on this page.

1. Replacing Refrigerator Door Handle

•

Align keyhole slots (1) on the top
and bottom of the back of the
handle with the screws (2) mounted
on the front of the door.

•

Press the handle against the door
front, making sure that the screws
(2) go into the keyhole slots (1).

•

Holding the handle with both
hands, press it firmly against the
front of the door and slide the
handle down (3).

2. Replacing Freezer Drawer Handle

•

Align keyhole slots (4) on the right
and left sides of the back of the
handle with the screws (5) mounted
on the front of the drawer.

•

Press the handle against the
drawer front, making sure that the
screws (5) go into the keyhole slots
(4).

•

Holding the handle with both
hands, press it firmly against the
front of the drawer and slide the
handle to the left (6).

Screws

mounted

on door

Screws

mounted

on door

Keyhole
slots on
back of
handle

Summary of Contents for GR-F258



































Search results

Summary of Contents for GR-F258

Reviews:

Related manuals for GR-F258

Brands by name

Popular brands

LG GR-F258, User Manual

Search results

Summary of Contents for GR-F258

Reviews:

Related manuals for GR-F258

Brands by name

Popular brands