LG GR-B852GSPC, Owner'S Manual

Page: 15 / 26

OPERATIONS
15
●
Set replacement timing (Initialization)
After the user replaces the filter, the user can set the
time for the next replacement.
• Close the refrigerator door and press the
button on the display panel on the front side of the
door for more than 5 seconds to check that the
RESET lamp on the display panel is turned off.
●
Switch over to use mode
Switch over to use mode.
• To use the HYGIENE FRESH filter, press the button on the display panel on the front side of the
door and switch over to the AUTO or POWER mode.
(Whenever you press the button, the HYGIENE FRESH filter will be switched to OFF AUTO
POWER OFF.)
w w CAUTION
When the user switches to AUTO or POWER mode, the LED around the filter is also turned on. Open the
door to check whether the LED around the filter is also turned on. Do not put in your finger or alien
particles inside the fan. It can be caused of an injury or malfunction.
You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.
During use notify
time to RESET
When switched
over to OFF mode
OFF AUTO POWER OFF
w w CAUTION
• Do not wash the HYGIENE FRESH filter by using water because It can be caused of malfunction.
• If the user continuously use the filter after the time to RESET, It can be caused of malfunction.
• This filter may not be effective for all types of bacteria and virus.
• This is effective to remove the bacteria which is not on the food in the refrigerator.