To Reverse the Doors
Precaution
1.
2.
3.
4.
How to Reverse the Door
1.
To separate the door handle of the left side, separate
the door cap and unscrew the screw in counterclockwise
direction.Separate the door handle of the freezer in the
same order.
2
1
3
4
2.
After unscrewing the screw of the right hinge cover
on the top, separate the right hinge cover to separate
the connecting cable .Separate the bolt fixating the
upper right hinge , and carefully separate the refrigerator
door . Remove the left cover .
5
5
6
8
7
10
19
9
30
Your fridge-freezer is designed with reversible doors,so that they may open from either
the left or right hand side to suit your kitchen design.
Before reversing the door, first of all,you should take out food and accessories like
shelves or trays which are not fixed in the fridge-freezer.
Use Torque Wrench or Spanner to fix or remove the bolt.
Do not lay the fridge-freezer down.This will cause problems.
Be careful not to drop the doors in disassembling or
assembling.
3.
After separating the upper left cap of the separated
refrigerator door , carefully take off the top cap and
pull the cable to connect to the hole on the leftside.
Set the separated top cap at the regular position and
set the cap on the cable hole on the right side. Loosen
the screw under the cold room door , move it
to the left of the stopper , and then connect it.
11
13
10
12
11
12
32
31
10
4.
Use a sharp gimlet or knife to disconnect the cap from
the cover front , loosen the screw , and then move
the cable to the left to be mounted. Disconnect the cable
and the door switch from the disconnected cover front
, swap the position of the disconnected cable and door
switch with the cap , mount them, fix them with the
screw , and then install the cap .
15
14
18
14
38
40
16
38
16
39
15
40
2
1
4
3
2
3
2
10
11
12
13
31
32
5
6
7
9
8
10
16
15
14
18
19
38
40
39
43
44
43
44
Summary of Contents for GR-B419WLQK
Page 30: ...Memo ...
