LG GOLDSTAR WE32Q10IP, Service Manual, Page: 58 / 63

Connection of external equipment
You can connect additional equipment, such as VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the ‘Manual programme tuning’ section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.
Euro scart sockets
1. Connect the Euro scart socket of the VCR to the Euro scart
socket 1 or 2 of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket 1 or 2, the set will switch to
AV 1 or AV 2 mode automat-
ically. But if you want to keep on watching TV mode, press the
D D / E E
or NUMBER buttons.
Otherwise press the TV/AV button on the remote control hand-
set to select
AV 1 or AV 2 . The VCR playback picture appears
on the screen.
You can also record programmes received by the TV on video
tape.
Note :
a. Signal type RGB, i.e. the signals red, green and blue can only
be selected for the Euro scart socket 1 (not Euro scart 2).These
signals are transmitted, for example, by a computer, pay TV
decoder, game machine or photo CD unit, etc.
b. If both Euro scart 1 and 2 sockets have been connected to the
VCRs simultaneously, only the
AV 1
can be received.
Audio/Video in sockets
1. Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2. Press the TV/AV button to select AV 3 .
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket on the side panel.
24
VCR
ANT IN
75 Ω
L L
1 2
VCR
S-VIDEO
VIDEO
R
AUDIO
AV3
L/MONO
VCR
ANT IN
75 Ω
L L
1 2