LG GN-U292RLC, Owner'S Manual

Page: 3 / 12

3
INSTALLATION
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION, AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
SELECT A GOOD LOCATION
1. Place your refrigerator where it is easy to use.
2. Avoid placing the refrigerator near heat
sources, direct sunlight or moisture.
3. Air must circulate properly around your
refrigerator to ensure efficient operation.
If your refrigerator is placed in a recessed area
in the wall, allow at least 10 inches (25 cm) or
greater clearance above the refrigerator and 2
inches (5 cm) or more from the wall.
The refrigerator should be elevated 1 inch
(2.5 cm) from the floor, especially if the floor is
carpeted.
4. To avoid vibrations, the refrigerator must be
level. If necessary, adjust the leveling screw(s)
to compensate for unevenness of the floor.
To close the doors easily, the front should be
slightly higher than the rear. Leveling screw(s)
can be turned easily by tipping the cabinet
slightly. Turn the leveling screw(s) clockwise to
raise the refrigerator, counterclockwise to
lower it.
NEXT
1. Wipe off all dust accumulated during shipping
and clean your refrigerator thoroughly.
2. Install accessories such as the ice cube box,
evaporating tray cover, etc., in their proper
places. They are packed together to prevent
possible damage during shipping.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
4. Prior to use, let the refrigerator run for 2-3
hours. Check the flow of cold air in the freezer
compartment to ensure proper cooling has
taken place.Your refrigerator is now ready for
use.