OPERATIONS
HYGIENE FRESH (OPTIONAL)
Life of the filter is about 1 to 2 years. (The life of the filter may vary by the environment of the
consumer.)
How to remove existing filter
When the RESET lamp is turned on, replace the filter.
When the “RESET” lamp is turned on, replace the
filter to maintain the performance of the HYGIENE
FRESH filter.
To replace the filter, press the
to switch to OFF mode.
Hold the filter cover and rotate counterclockwise to
separate the cover. Pull out the HYGIENE FRESH
filter inserted inside the filter cover.
How to install the new filter
Install the new filter.
Insert the new HYGIENE FRESH filter in the separated
filter cover so that the hooks around the filter are visible.
.
(If the filter is inserted in reverse direction, it will not be
assembled.)
Insert the filter cover to its original position and then turn
clockwise by 30 degrees to lock the filter cover.
You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.
During use notify
time to RESET
When switched
over to OFF mode
CAUTION
Before installing or using the product, make sure to read the owner's manual carefully to use the product
accurately as intended. This HYGIENE FRESH filter has the antibacterial function of removing the virus
or bacteria inside the refrigerator and the deodorizer function to remove the scent.
The function has tested and has been certificated by authorized institutions
Intertek
button
w
w
*
●
•
•
•
●
•
•
.
REF. TEMP
. CONTROL
MIN
MAX
1
6
Summary of Contents for GN-M492GLHH
Page 26: ......
