2
5
SMART DIAGNOSIS (Only for applied models)
Smart diagnosis function is...
Be aware!
Difference of the regional call qualities may have influence on the function.
If you use home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be fluent due to call quality problem, and in such case, smart
diagnosis service may be difficult.
How to use the function
1. Open all the doors of the refrigerator.
2. Press the refrigerator door open detection
switch 5 times as in the figure to make the
light inside the chamber blink.
3. Place the phone near the speaker hole at the
top right.
4. Do not take away the telephone while data is
being transmitted.
5. After the completion of the data transmission,
listen to the explanation of the consultant
about the result of the smart diagnosis.
w
CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.
REF. TEM.P
CONTROL
MIN
MAX
REF. TEM.P
CONTROL
MIN
MAX
REF. TEM.P
CONTROL
MIN
MAX
REF. TEM.P
CONTROL
MIN
MAX
Use the function to contact the service center and receive precise diagnosis when the refrigerator
malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.
Check if the speaking side(microphone) of the
telephone is toward the speaker hole.
During the data transmission for smart diagnosis,
wait with the telephone placed near the speaker
hole at the top right side.
When the data transmission is completed, along
with the display of the data transmission
completion, the refrigerator will be automatically
turned off and on a few seconds later.
Listen to the explanation of the consultant about
the result of the analyzed diagnosis and follow the
instructions.
FOR INTERNAL CONTROLLER MODEL
