SMART DIAGNOSIS (Only for applied models)
25
Use the function to contact the service center and receive precise diagnosis when the refrigerator
malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.
How to use the function
1. Open all the doors of the refrigerator.
2. Press the refrigerator door open detection
switch 5 times as in the figure to make the
light inside the chamber blink.
5. After the completion of the data transmission,
listen to the explanation of the consultant
about the result of the smart diagnosis.
When the data transmission is completed,
along with the display of the data transmission
completion, the refrigerator will be
automatically turned off and on a few seconds
later.
Listen to the explanation of the consultant
about the result of the analyzed diagnosis and
follow the instructions.
Be aware!
■
Difference of the regional call qualities may have influence on the function.
■
If you use home phone, better communication performance will enable much better service.
■
Smart diagnosis data transmission may not be fluent due to call quality problem, and in such
case, smart diagnosis service may be difficult.
3. Place the phone near the speaker hole at
the top right.
Check if the speaking side(microphone) of
the telephone is toward the speaker hole.
4. Do not take away the telephone while data is
being transmitted.
During the data transmission for smart
diagnosis, wait with the telephone placed near
the speaker hole at the top right side.
Smart diagnosis function is...
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.
CAUTION
FOR INTERNAL CONTROLLER MODEL
REF. TEM.P
CONTROL
MIN
MAX
REF. TEM.P
CONTROL
MIN
MAX
REF. TEM.P
CONTROL
MIN
MAX
REF. TEM.P
CONTROL
MIN
MAX
Summary of Contents for GN-B352RLCL
Page 27: ...MEMO ...
Page 28: ...P NO MFL67711154 ...
