31
OPERATION
ENGLISH
Craft Ice Maker Type B
a
Feeler Arm
b
Power Switch
NOTE
• The ice bin stores 15 - 18 pieces of round ice.
CAUTION
• Do not insert round ice into the in-door ice bin,
as it can damage the ice and water dispenser.
NOTE
• The icemaker begins producing ice
approximately 48 hours after the appliance is
initially installed. The first batches of ice may not
be round and clear.
• If the water pressure is less than 20 psi (138 kPa)
or a reverse osmosis system is used, the shape
of the ice may vary.
• The ice may look cloudy depending on the water
quality in the installation location and the
operating conditions.
• Throw away any shards of ice you may find in the
ice bin, as they may stick to the ice stored in the
ice bin.
• After a short term power outage, it will take
longer to make the first batch of ice, and the ice
may not be round. If the power will be out for a
longer period, throw away the ice stored in the
ice bin.
• The
Craft Ice
icemaker produces 1 batch of
round ice (3 pieces) at a time.
• In
3 ICE
mode, the
Craft Ice
icemaker produces
1 batch of round ice (3 pieces) about every 24
hours. In
6 ICE
mode, the
Craft Ice
icemaker
produces 2 batches of round ice (6 pieces total)
in the same period.
• For more ice, select the
6 ICE
mode. For clearer
ice, select the
3 ICE
mode.
• The time needed to make ice may vary according
to operating conditions.
Using the Freezer Ice Basket
The ice basket stores ice from the freezer icemaker.
CAUTION
• The freezer ice basket must be placed in the
correct orientation. Failure to do so can damage
the ice basket and icemaker.
• Remove the ice basket to create more space
inside the freezer if you do not use it.
• The pad on the bottom of the ice basket is
designed to reduce the sound of the ice
dropping. Do not remove the pad.
• Clean the pad with water and dry it thoroughly
before putting it back in place.
Removing/Refitting the Ice
Storage Bin
The ice dispensing chute may become blocked with
frost if only crushed ice is used. Remove the frost
