REFRIGERATOR INSTALLATION
7
REMOVING AND REPLACING
REFRIGERATOR DOORS
WARNING
Electric Shock Hazard
• Disconnect electrical supply to the refrigerator
before installing. Failure to do so could result in
death or serious injury.
• Do not put hands or feet or other objects into the
air vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.
• Be careful when you work with the hinge, base
grille, and stopper. You may be injured.
Before remove the doors, remove the Base Grille.
See
BASE GRILLE INSTALLATION
for reference.
To remove the right (refrigerator) door:
HANDLE REMOVAL
NOTE:
It is ALWAYS recommended to remove the
refrigerator doors when it is necessary to move the
refrigerator through a narrow opening. If necessary,
follow the directions below to remove the door handles.
•
•
The
Grasp the handle tigthtly with both hands and slide the
handle up (1) (this may required some force).
keyhole slots (2) on the back of the handle allow
the handle to separate from the mounting screws (3).
Keyhole slots
on back of
handle
Screws
mounted
on door
CAUTION:
It could be damaged and broken when
you hit with hammer while you remove and attach
the handle.
CAUTION:
When you assemble or dissasemble
handle, you must push and pull with moment force.
CAUTION:
When lifting the hinge free of the latch,
be careful that the door does not fall forward.
(1)
(2)
(3)
(4)
(5)
1. Open the door. Remove the top hinge cover screw
3. Rotate the hinge lever (3) clockwise. Lift the top hinge
2. Use a flat blade screwdriver to pry back the hooks
(not shown) on the cabinet underside of the cover (2).
Lift up the cover.
4. Lift the door from the lower hinge pin.
5. Place the door, inside facing up, on a nonscratching
surface.
(1).
Type 2
Type 1
(4) free of the hinge lever latch (5).
(3)
(4)
(5)
Rivet
NOTE
: Regardless the type of hinge lever (3);
type1: with
rivet or type 2: with rivet the
removal process is the same.
out
Summary of Contents for GM-L261BNRY
Page 29: ... MFL33759908 ...
