LG GM-F208ST Owner'S Manual Download Page 40

Page: 40 / 42

NOISE

Problem

Possible Causes

Solutions

Clicking

The defrost control will click when the

automatic defrost cycle begins and ends.

The thermostat control (or refrigerator

control on some models) will also click

when cycling on and off.

Normal Operation

Rattling

Rattling noises may come from the flow

of refrigerant, the water line on the back

of the unit, or items stored on top of or

around the refrigerator.

Normal Operation

Refrigerator is not resting solidly on the

floor.

Floor is weak or uneven or leveling legs need to

be adjusted. See the Door Alignment section.

Refrigerator with linear compressor was

jarred while running.

Normal Operation

Whooshing

Evaporator fan motor is circulating air

through the refrigerator and freezer

compartments.

Normal Operation

Air is being forced over the condenser by

the condenser fan.

Normal Operation

Gurgling

Refrigerant flowing through the cooling

system.

Normal Operation

Popping

Contraction and expansion of the inside

walls due to changes in temperature.

Normal Operation

Sizzling

Water dripping on the defrost heater

during a defrost cycle.

Normal Operation

Vibrating

If the side or back of the refrigerator is

touching a cabinet or wall, some of the

normal vibrations may make an audible

sound.

To eliminate the noise, make sure that the sides

and back cannot vibrate against any wall or

cabinet.

Dripping

Water running into the drain pan during

the defrost cycle.

Normal Operation

Pulsating or High-

Pitched Sound

Your refrigerator is designed to run

more efficiently to keep your food items

at the desired temperature. The high

efficiency compressor may cause your

new refrigerator to run longer than

your old one, but it is still more energy

efficient than previous models. While

the refrigerator is running, it is normal to

hear a pulsating or high-pitched sound.

Normal Operation

TROUBLESHOOTING GUIDE

Summary of Contents for GM-F208ST











































Search results

Summary of Contents for GM-F208ST

Reviews:

Related manuals for GM-F208ST

Brands by name

Popular brands

LG GM-F208ST, Owner'S Manual

Search results

Summary of Contents for GM-F208ST

Reviews:

Related manuals for GM-F208ST

Brands by name

Popular brands