LG GL-M492GGLJ, Owner'S Manual

Page: 21 / 84

OPERATIONS
You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.
HYGIENE FRESH (OPTIONAL)
CAUTION
The function has tested and has been certificated by authorized institutions Intertek
Switch over to use mode
Switch over to use mode.
To use the HYGIENE FRESH filter, press the
front side of the door and switch over to the AUTO or POWER mode.
(Whenever you press the button, the HYGIENE FRESH filter will be switched to
POWER OFF.)
CAUTION
When the user switches to AUTO or POWER mode, the LED around the filter is also
turned on. Open the door to check whether the LED around the filter is also turned on.
Do not put in your finger or alien particles inside the fan. It can be caused of an injury or
malfunction.
Do not wash the HYGIENE FRESH filter by using water because It can be caused of malfunction.
This filter may not be effective for all types of bacteria and virus.
This is effective to remove the bacteria which is not on the food in the refrigerator.
button on the display panel on the
AUTO
•
•
•
•
OFF AUTO POWER OFF
•
CAUTION
OFF
21
Before installing or using the product, make sure to read the owner's manual carefully to
use the product accurately as intended. This HYGIENE FRESH filter has the
antibacterial function of removing the virus or bacteria inside the refrigerator and the
deodorizer function to remove the scent.
LED PATTEN DURING INVERTER-ON MODE (OPTIONAL)
During the use of this feature, you will find this pattern of LED running. It is a symbol that the
product is running at basic energy requirement. One can press the button “REF TEMP” to
change the LED setting during power cuts, if needed. The LED will then show the setting as
desired. When the mode is changed from Normal supply to Inverter mode & vice versa, the
LED pattern will take some time to display the change.