- 5 -
Do not modify or extend the Power Cord length.
• It will cause electric shock or fire.
About earthing
In the event of an electric short circuit, earthing reduces the risk of electric
shock by providing an escape wire for the electric current.
Improper use of the earthing plug can result in an electric shock. Consult
a qualified electrician or service person if the grounding instructions
are not completely understood, or if you have doubts on whether the
appliance is properly earthed.
In order to prevent possible electric shock, this appliance must be earthed
.
Child Entrapment Warning
An empty refrigerator can be a dangerous attraction to children. Remove
gaskets, latches, lids or the entire door from your unused appliance, or
take some other action to make it harmless.
Never place glass products in the freezer because they may
break due to expansion when their contents are frozen.
Unplug the appliance before cleaning or maintenance.
Wax Thinner
n
The meanings of the symbols used in this manual are as shown below.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to properties only.
This symbol alerts you to the risk of electric shock.
NEVER STORE EXPLOSIVES AND CHEMICALS INSIDE
REFRIGERATOR.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
When the power cord or the power plug is damaged or the holes of the outlet
are loosed, do not use them.
It may cause electric shock or short circuit to make fire.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
NOTE
Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the
same size, shape and wattage.
• Unplug the power cord from the outlet.
• Remove the lamp cover by pulling outside.
• Make sure the bulbs are cool to touch.
• Remove the lamp by turning it counterclockwise.
• Put new lamp and tighten it by turning it clockwise.
• Make sure the bulb is properly tightened.
• Put the cover lamp back and push it gently with your thumb till a click sound appears.
Children should be supervised to ensure that they do not play with the appliance.
Safety Precautions
Lamp Replacement
Power Cord Replacement
DANGER
