11
INSTALLATION
EN
Notes for Movement and
Transport
•
Remove all food from inside the appliance. Then,
transport the appliance only after fixing fragile parts
such as shelves and the door handle with tape.
Failure to do so may cause appliance damage.
•
Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance. Failure to do so may cause damage to
the power plug or floor scratch.
•
When transporting the appliance, more than two
people should transport the appliance carefully.
Dropping the appliance, which is extremely heavy,
may cause personal injury or appliance failure.
•
When transporting the appliance over a long
distance, keep the appliance upright. The appliance
may fall over, causing malfunctions. Never
transport the appliance laying down as it can cause
a refrigerant circulation malfunction when it is
turned back on again.
Notes for Installation
•
Install the appliance on a solid and flat area.
−
If the appliance is installed on an uneven floor,
it can cause vibration and noise causing the
appliance to fall resulting in injury. It could
also cause the doors not to close correctly
and introduce moisture inside the unit during
operation.
−
If the appliance front or rear is not level, adjust
the front feet so that it can be corrected. Severe
cases may need the floor to be packed out with
strips of thin timber.
•
Avoid placing the unit near heat sources, direct
sunlight or moisture.
•
Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on the
same outlet.
•
After connecting the power supply cord (or plug) to
the outlet, Wait 2-3 hours before you put food into
the appliance. If you add food before the appliance
has cooled completely, your food may spoil.
•
Models with handles should be located at least 55
mm from the wall on the hinge side to open door
by 90°.
•
Allow over 55 mm clearance to the right, left, back
and top when installing.
Ambient Temperature
The appliance is designed to operate at the limited
range of ambient temperature, depending on climate
zones. Do not use the appliance at the temperature
over the limit. Climate class of your appliance is
indicated on the label with technical description inside
the freezer compartment.
Class
Symbol
Ambient
temperature
range ºC
Extended
temperate
SN
+10 – +32
Temperate
N
+16 – +32
Subtropical
ST
+16 – +38
Tropical
T
+16 – +43
Extended
temperate
-Tropical
SN-T
+10 – +43
Leg Adjustment
To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to compensate
for the uneven floor.
The front should be slightly higher than the rear to aid
in door closing.
Leveling screws can be turned easily by tipping the
cabinet slightly.
Turn the leveling screws counterclockwise
to
raise the unit, clockwise
to lower it.
