26
HOW TO USE
Change Filter
When the Change Filter icon turns on, the air filter
needs to be replaced. After replacing the air filter,
press and hold the Pure N Fresh button for three
seconds to turn the icon light off. Change the air
filter approximately every 6 months.
Control Panel Features (continued)
Express Freeze
This function increases both ice making and
freezing capabilities.
When you touch the
y
Express Freeze
button,
the graphic will illuminate in the display and
will continue for 24 hours. The function will
automatically shut off after 24 hours.
You can stop this function manually by touching
y
the button one more time.
Light
When you press the Light button, the dispenser
light will turn on and the indicator will appear on
the LED display.
Change Water Filter
When the water filter indicator turns on, it is
recommended to change the water filter. After
changing the water filter, press and hold the
Change Filter button for three seconds to turn the
indicator light off. You should change the water
filter approximately every six months or when the
water quality or the flow is reduced. To clear the
water filter indicator, touch the LIGHT / WATER
FILTER button for 3 seconds whilst the display
panel is illuminated.
Door Alarm
When power is connected to the fridge, the
y
door alarm is initially set to ON. When you press
the
Alarm
button, the display will change to OFF
and the
Door Alarm
function will deactivate.
When either the fridge or the freezer door is left
y
open for more than 60 seconds, the alarm tone
will sound to let you know that the door is open.
When you close the door, the door alarm will
y
stop.
Lock
The Lock function disables every other button
on the display panel. it does not lock or stop
the water or ice dispenser functions.
When power is initially connected to the
y
fridge, the
Lock
function is off.
If you want to activate the
y
Lock
function to
lock other buttons, press and hold the
Lock
button for three seconds or more. The
Lock
icon will display and the
Lock
function is now
enabled.
To disable the
y
Lock
function, press and hold
the
Lock
button for approximately three
seconds.
Power Saving Mode
When the fridge is in the
y
Power Saving Mode
,
the display will remain off until a door is
opened or a button is pressed. Once on,
the display will remain on for 20 seconds.
To change any settings, the display must be
illuminated before it will respond. Pressing a
button is required to re activate the display
before making setting changes.
[
]
( On some
models)
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in
the fridge and freezer sections to conserve
energy while on display in a retail store. When
activated, OFF will display on the control panel
and the display will remain on for 20 seconds.
To deactivate / activate:
With either fridge door opened, press and hold
the Fridge and press Express Freeze button
3times. The control panel will beep and the
temperature settings will display to confirm
that Display Mode is deactivated. Use the
same procedure to activate the Display Mode.
