13
INSTALLATION
ENGLISH
Accessories
*1 This feature is only available on some models.
a
b
c
Water Filter
d
Water Tube
e
Tube Connector and Clip
f
Tube Connector and Valve
Removing the Fridge and
Freezer Door
If your entrance door is too narrow for the
appliance to pass through, remove the appliance
doors and pass the appliance laterally.
WARNING
• Disconnect the power cord, house fuse or circuit
breaker before installing, removing the doors, or
cleaning the appliance. Failure to follow these
instructions may result in death, fire or electric
shock.
Removing the Freezer Door
1
The water supply line is connected to the top
right part in the back of the appliance. Hold the
water supply connection and gently push the
collet
a
to detach the water supply line.
Unscrew the cover
b
.
2
Remove the screw from the hinge cover at the
top of the appliance. Lift the hook, located at
the bottom of the front side of the cover, with
a flat-head screwdriver.
3
Pull out the tube
c
. Unscrew the ground wire
d
. Disconnect all wire harnesses
e
.
NOTE
• The number of wire harnesses may vary
depending on the model.
Summary of Contents for GCJ-287GNW
Page 3: ...TROUBLESHOOTING Before Calling for Service 43 ...
Page 50: ...Memo ...
Page 51: ...Memo ...
Page 52: ......