DirectCD
TM
v2.5b(s)
Installation
11
For Windows
95/98/2000/ME/
XP Users
For Windows
NT
Workstation
Ver.4.0 Users
Device Drivers
When using Windows 95/98/2000/ME/XP or Window NT
Workstation Ver. 4.0, no special device driver is required. Your system,
upon Power On and bootup after installing and connecting the new CD-
RW drive, will recognize and load native software drivers automatically.
The DOS and Windows 3.1 users can download the DOS Device drivers
anytime via internet.
For your information, please consult the following internet sites:
http://www.lge.com
http://www.lgeservice.com/drivers.html
■
In order to ensure normal drive operation, please check the following:
• The drive is displayed in
Windows 95/98/ME : [Control Panel]-[System]-[Device Manager]-
[CD-ROM]
Windows 2000/XP : [Control Panel]-[System]-[Hardware]-[Device
Manager]-[DVD/CD-ROM-Drive]
• 32-bit is displayed in
[Control Panel]-[System]-[Performance]
■
If the drive is not recognized by your computer, please check the
following items.
• If an
indicator is displayed on the IDE controller in [Control
Panel]-[System]-[Devices Manager]-[Hard Disk Controller], you
will need to contact your PC’s manufacturer or the motherboard’s
manufacturer and get the appropriate IDE controller driver.
■
Run
Add New Hardware
in Control Panel to let PC search again for
new device.
■
In order to ensure normal drive operation, please check to see if the
drive is displayed on the IDE controller in [Control Panel]-[SCSI
Adapter]-[Devices]
■
If the drive is not recognized by your computer, an
indicator is
displayed on the IDE controller in [Control Panel]-[SCSI Adapter]-
[Devices], you will need to contact your PC’s manufacturer or the mother-
board’s manufacturer and get the appropriate IDE controller driver.
