26
OPERATION
d
Fridge
*1
•
Type 1
- Press this button repeatedly to select a desired temperature between 0 °C and 6 °C.
•
Type 2
- Press this button repeatedly to select a desired temperature between 1 °C and 7 °C.
• The default fridge temperature is 3 °C.
NOTE
• The actual inner temperature varies depending on the food status, as the indicated setting temperature
is a target temperature, not actual temperature within the appliance.
e
Water Filter
*1
Replace the water filter when the
h
indicator lights up.
• After changing the filter, push and hold the
Water Filter
button for three seconds to reset the filter
replacement reminder indicator.
f
Lock
This locks buttons on the control panel.
• To lock the control panel buttons, press and hold the
Lock
button for 3 seconds until the
k
icon
appears and the function is activated.
• To disable the function, press and hold the
Lock
button for 3 seconds until the
l
icon appears and
the function is deactivated.
g
Water & Ice Type
Select a desired dispenser mode from the buttons on the control panel. Press the dispenser switch with
a glass or other container to dispense cubed ice, water or crushed ice.
h
Non Plumbing
*1
The
Non Plumbing
icon is illuminated when the water dispenser tank is installed correctly.
i
Self Care
*1
UV light is used to keep the water outlet clean. UV clean function runs automatically for 10 minutes
every hour or can be manually activated at anytime.
Press this button to activate it manually.
NOTE
• This function will momentarily stop each time the
Water
button is pressed if it is in operation and will
resume the function after 1 hour.
• This function runs automatically for 10 minutes every hour without pressing the
Self Care
button.
•
UVnano
is a compound word derived from the words UV and its unit, nanometer.
NOTE
• The control panel automatically turns off for energy saving.
global_main.book.book Page 26 Thursday, April 22, 2021 11:31 AM
