LG GC-M247UGBM, Owner'S Manual

Page: 15 / 40

15
EN
NOTE
•
It is normal installation for the appliance to
slightly tilt backwards to close the doors
smoothly.
Adjusting the Height of the
Door
If the door of the appliance is not level, adjust
the difference in the height of appliance door
using the following method.
NOTE
• Because the hinge pin may fall out, do not
adjust the height of the appliance door more
than 5 mm.
[Method1]
*Reference
Keeper nut
Adjustment hinge pin
1
Turn the keeper nut clockwise using the
spanner.
To loosen the nut
2
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise
with an 8 mm spanner.
Down
Up
3
Fasten the keeper nut by turning it
counterclockwise.
To tighten the nut
If it is impossible to adjust the height of the
appliance door through the above method, level
the door according to the following guide.
[Method2]
1
If the freezer compartment door is lower
than the fridge compartment door
Level the door by inserting flat(-type) driver
into groove of the left height adjusting screw
and rotate it clockwise.
2
If the freezer compartment door is higher
than the fridge compartment door
Level the door by inserting flat(-type) driver
into groove of the right height adjusting
screw and rotate it clockwise.