Care and Maintenance
DRIP TRAY
1.
Slowly pull the DRIP TRAY out.
2.
Afte discharging drip water inside the DRIP TRAY,
clean and fully rinse the DRIP TRAY.
3.
Wipe moisture out around the DOOR part and the
DRIP TRAY using a clean cloth.
Exterior Dispenser
WATER TANK
CAP TANK
(Big & Small)
VALVE ASSEMBLY
1.
Lift the WATER TANK up by pressing the fixing LEVER
on the bottom of WATER TANK and then remove it.
2.
After removing the CAP TANK (BIG), clean and fully
rinse the inside/outside part of the WATER TANK by
using neutral cleansing agent.
Wipe moisture etc out outside of Dispenser and on the
DISPENSER PAD using a cloth.
Clean and fully rinse the CAP TANK (Big & Small) by using
neutral cleansing agent.
Especially for the groove part of the CAP TANK, it is
convenient to cleanse it by using a small brush.
Clean and fully rinse the VALVE ASSEMBLY by using a
small brush. Rinse it while operating the bottom part of
the valve assembly. Always fix the Sealing Rubber
separated for cleansing at the existing position
(may result in water leakage).
27
Summary of Contents for GB5133SVAW
Page 30: ...Memo 32 ...
