background image

Owner's Manual 

11

TIME

OFF

hr.

TEMP.

TIME

OFF

hr.

TIME

OFF

hr.

TEMP.

TIME

OFF

hr.

TEMP.

Cooling

Healthy

Dehumidification

Heating

(Heat pump model only)

TEMP.

TIME

OFF

hr.

TIME

OFF

hr.

TEMP.

Cooling

Healthy

Dehumidification

Bee

p, B

eep

Beep, Beep

Operating Instructions

ENGLISH

Healthy Dehumidification Operation Mode

Press the Start/Stop Button.

Select Healthy Dehumidification Operation.
Press the Operation Mode Selection Button.
Each time the button is pressed, the operation mode is shifted
in the arrow direction.

You can select the fan speed in four
steps-low, medium, high, or CHAOS.
Each time the button is pressed, the fan
speed mode is shifted.

1

2

3

This mode dehumidifies without overcooling.

During Healthy Dehumidification Operation:

o

If you select the dehumidification mode on the operation selection button, the airconditioner starts to run the
dehumidification function, automatically setting the room temp. and airflow volume to the best condition for
dehumidification based on the sensed current room temp.

In this case, however, the setting temp. is not displayed in the remote control and you are not able to control the
room temp. either.

o

During the healthy dehumidification function, the airflow volume is automatically set according to the
optimization algorithm responding to the current room temp. status and makes the room condition healthy and
comfortable even in the high humidity season.

Summary of Contents for G09LHK





















Reviews: