26
EN
Add Item
Use this option to add or remove the laundry after
the washing programme is started.
1
Press the
Add Item
button when the LED is
turned on.
2
Open the door after it unlocks itself.
3
Add or remove laundry.
4
Close the door and press the
Start/Pause
button.
NOTE
•
For safety reasons, the door remains locked
when the water level or temperature inside
of the drum is high. It is not possible to add
laundry at this time.
Temp.
Use this option to select the wash and rinse
temperature in combination for the selected
programme. Press this button until the desired
setting is lit. Cold tap water is used for all rinses.
•
Select the water temperature suitable for the
type of laundry you are washing. Follow the
fabric care labels for best results.
Spin
p
Use this option to change the spin strength. Press
the
Spin
button repeatedly to change the speed
level.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Spin
button to select spin speed.
4
Press the
Start/Pause
button.
NOTE
•
When you select
No
, it will still rotate for a short
time to drain quickly.
Beep On/Off
q
This function operates only when the appliance is
in operation.
•
Press and hold the
Rinse+
and
Dry
button
simultaneously for 3 seconds to set the this
function.
NOTE
•
Once this function is set, the setting is
memorized even after the power is turned off.
•
If you want to turn the beeper off, simply repeat
this process.
Child Lock
i
Use this function to disable the controls. This
function can prevent children from changing cycles
or operating this appliance.
NOTE
•
Once this function is set, all buttons are locked
except the
Power
button.
•
When the controls are locked,
CL
and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
•
Turning off the power will not reset this
function. You must deactivate this function
before you can access any other functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the
Delay End
and
Add Item
button for 3 seconds to activate this function.
•
A beeper will sound, and
CL
will appear on
the display.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the
Delay End
and
Add Item
button for 3 seconds to deactivate this
function.
Summary of Contents for FWV595 Series
Page 44: ......
