LG freezer, Owner'S Manual

Page: 42 / 53

10
2. Insert the hinge base ② into the hinges (two spots). (See Figure 1)
(If the thickness of the cabinet is 20mm, do not install the hinge base ② .)
3. Lean the refrigerator backward and then fix the depth adjust bracket ⑦ at the bottom (two
spots) of the refrigerator door by using the hinge screws
ⓔ
as shown at the figure.
4. Draw the power cable through the back of the cabinet.
Be careful that the power cord is not trapped beneath the
refrigerator as you install it into the cabinet. The cord may
be crushed and damaged resulting in a fire hazard. Hang it
on the rear holder if possible.
5. Insert the refrigerator into the cabinet so that the
end of the hinge stand ② align to the front part of
the cabinet.
Caution must be taken not to jam your hands between
refrigerator and cabinet when inserting refrigerator into
cabinet.
If there is any excess length on the power cord, hang the excess up on a holder, or hook so that it
cannot be crushed or damaged by the product when it is installed into the cabinet.
cabinet
Hinge
Hinge base ②
Front side of
the cabinet
(Figure 3)
The top of the cabinet (floor view)
6. Procedure to install
1) Preparing before installing the refrigerator
2) Case-related Work After Inserting Refrigerator
e
e
2
7
7
2