9
206-4290
Load default FTG
Installer Menu for
selected model(s).
Copy FTG Installer Menu
settings to and from FMA
Configuration List.
Copy FTG Channel
Map to and from FMA
Configuration List.
Set the FMA
broadcast rate.
Set the FMA clock
to the PC’s clock.
Confirm IP address
for FMA IP
Communication.
Filename of opened
FTG Configuration
(.rml) file.
FMA Configuration List
Data to be saved in FMA
Configuration (.fma) file or
ready for transfer to FMA.
Write/Read
FMA Configuration
Transfer options.
New/Open/Save
FMA File options.
(Continued from previous page)
5. To add the current FTG Installer Menu settings to the FMA Configuration List, click
under FTG
Installer Menu Settings. This will copy the selected model’s settings to the FMA Configuration List.
Note:
If you make any change(s) in the FTG Installer Menu Configuration Utility to the current data to
be included in the FMA Configuration List, you will need to recopy the FTG Installer Menu settings to
the FMA Configuration List.
6.
Repeat steps 4 and 5 as necessary to add additional Installer Menu profiles to the FMA Configuration
List. Then, click the
Save
button in the FMA File command section of the FMA Configuration Utility
screen (above the FMA Configuration List) to save the FMA Configuration List contents to an FMA
Configuration (.fma) file on the PC’s hard drive for later use.
7. In the Save As window, name the file (avoid using special characters, such as ?, &, @, etc.) and click
Save
. The default folder path is C:\Program Files\Zenith\Widget
. Note that the FMA Configuration file
will have an “.fma” extension.
Note:
To remove an individual item from the FMA Configuration List before saving the new file, click
on/highlight the item to be removed, and then click the
Remove
Item
button directly above the FMA
Configuration List window. To clear the current FMA Configuration List contents, click
the
New
button in
the FMA File command section of the FMA Configuration Utility.
Creating an FMA Configuration File (Cont.)
Note: The data referenced in the FMA Configuration List is a only snap-shot of the current
FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any
change(s) to the current data to be included in the FMA Configuration List, you will need to
recopy the FTG Channel Map and FTG Installer Menu settings to the FMA Configuration List.
