A5
Before Connecting to the PC
Removing the stand base
1.
Put the product with the front side facing downward on a soft cloth.
2.
To remove the stand base, hold the bottom of the stand with one hand and
pull the base bottom latch with the other hand, as shown in the figure.
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
Connecting the stand base
1.
Put the product with the front side facing downward on a soft cloth.
2.
Align the hooks on the stand base with the matching slots in the base of the product.
3.
Insert and push the hooks into slots.
Important
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Hook
Bottom Latch
Slot