A36
ENGLISH
No image appears
Check the following before calling for service.
No image appears
Check and see if the power cord is connected properly to
the power outlet.
Press the Power button.
Adjust the brightness and the contrast.
If the display is in power saving mode, try moving the
mouse or pressing any key on the keyboard to bring up the
screen.
This message appears when the signal from the PC (video
card) is out of horizontal or vertical frequency range of the
display. See the 'Specifications' section of this manual and
configure your display again.
* Max Resolution
1280 x 1024 @60Hz
Check if the HDTV resolution of your set top box is set at
480i. If so, reconfigure it to 480p720p/1080i
Check if connection is being made via the D-SUB cable. If
HDTV is connected via D-SUB cable, the interface method
and NTSC (60 Hz) are not supported. Use the HDTV port
(component) instead.
This message appears when the signal cable between
your PC and your display is not connected. Check the
signal cable and try again.
Press the
SOURCE
button on the remote control and
select and input signal connected.
Is the power cord of the
display connected?
Is the power indicator light
on?
When the power is on
with the power
indicator lighting blue,
does the screen appear
dark?
(Display:blue, Media
station:blue)
Is the power indicator
amber?
(Display:amber,
Media station:blue)
Do you see an "OUT OF
RANGE" message on the
screen?
Does the “OUT OF
RANGE” message appear
when you have set the
main source as HDTV?
Do you see a "CHECK
SIGNAL CABLE " message on
the screen?
Troubleshooting