background image

Regulatory Information cont. 

FCC Compliance Statement

This equipment has been tested and found to comply

within the limits of a Class B digital device pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio

or television reception (which can be determined by

turning the equipment on and off), the user is encouraged

to try to correct the interference by using one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and 

the receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

Caution: Changes or modifications not expressly approved

by the party responsible for compliance could void the

user's (or your) authority to operate the equipment. Only

peripherals (digital input/output devices, terminals, printers,

etc.) certified to comply with the Class B limits may be

attached to this monitor. Operation with non-certified

peripherals is likely to result in interference to radio and TV 

reception. Only shielded signal cables may be used with

this System.

Canadian DOC Notice

This Class B digital apparatus meets all requirements of

the Canadian Interference-Causing Equipment 

Regulations. Cet appareil numérique de la classe B

respecte toutes les exigences du Règlement sur le

matériel brouilleur du Canada.

CE Conformity Notice 

(for Europe)

Products with the “CE” Marking comply with the EMC

Directive(89/336/EEC) and LOW VOLTAGE Directive

(73/23/EEC) issued by the Commission of the European

Community.

Compiance with these directives implies conformity to the

following European Norms :

•  EN 55022

; Radio Frequency Interference

•  EN 55024

; Electromagnetic Immunity

•  EN 61000-3-2

; Power Line Harmonics

•  EN 61000-3-3

; Voltage Fluctuations

•  EN 60950

; Product Safety

Low Radiation Compliance (MPR II)

This monitor meets one of the strictest guidelines available

today for low radiation emissions, offering the user extra

shielding and an antistatic screen coating. These

guidelines, set forth by a government agency in Sweden,

limit the amount of emission allowed in the Extremely Low

Frequency (ELF) and Very Low Frequency (VLF)

electromagnetic range.

TCO95 

(TCO95 applied model only)

Congratulations! 

You have just purchased a TCO’95 approved and labelled

product! Your choice has provided you with a product

developed for professional use. Your purchase has also

contributed to reducing the burden on the environment and

to the further development of environmentally-adapted

electronic products.

01

NOTICE

The regulations are applied only to the products with the

ID LABEL indicating specific requirements.

NOTICE

The regulations are applied only to the products with the

ID LABEL indicating specific requirements.

NOTICE

The regulations are applied only to the products with the

ID LABEL indicating specific requirements.

Summary of Contents for Flatron L196WTQ





































Reviews: