background image

19

EN

Adding Cleaning Products

Detergent Dosage

 

Detergent should be used according to the 

instruction of the detergent manufacturer and 

selected according to type, colour, soiling of 

the fabric and washing temperature.

 

If too much detergent is used, too many suds 

can occur and this will result in poor washing 

results or cause heavy load to the motor.

 

If you wish to use liquid detergent follow the 

guidelines provided by the detergent 

manufacturer.

 

You can pour liquid detergent directly into the 

main detergent drawer if you are starting the 

cycle immediately.

 

Do not use liquid detergent if you are using 

Time delay, or if you have selected Pre Wash, 

as the liquid may harden.

 

If too many suds occur, reduce the detergent 

amount.

 

Detergent usage may need to be adjusted for 

water temperature, water hardness, size and 

soil level of the load. For best results, avoid 

oversudsing.

 

Refer to the label of the clothes, before 

choosing the detergent and water 

temperature.

 

When using the washing machine, use 

designated detergent for each type of clothing 

only:

 

General powdered detergents for all types of 

fabric

 

Powdered detergents for delicate fabric

 

Liquid detergents for all types of fabric or 

designated detergents only for wool

 

For better washing performance and 

whitening, use detergent with the general 

powdered bleach.

 

Detergent is flushed from the dispenser at the 

beginning of the cycle.

NOTE

 

Do not let the detergent harden. Doing so may 

lead to blockages, poor rinse performance or 

odour.

 

Full load : According to manufacturer’s 

recommendation.

 

Part load : 3/4 of the normal amount

 

Minimum load : 1/2 of full load

Adding Detergent and Fabric 

Softener

Adding Detergent

 

Main wash only → 

 

Pre wash+Main wash → 

NOTE

 

Too much detergent, bleach or softener may 

cause an overflow.

 

Be sure to use the appropriate amount of 

detergent.

Adding Fabric Softener

 

Do not exceed the maximum fill line. 

Overfilling can cause early dispensing of the 

fabric softener, which may stain clothes. Close 

the dispenser drawer slowly.

Summary of Contents for FH2J3HDN(P)(0~9)














































Reviews: