LG F4J7JN Series Owner'S Manual Download Page 23

Page: 23 / 52

Control Panel

Power Button

•

Press the

Power

button to turn the

washing machine on.

Start/Pause Button

•

This

Start/Pause

button is used to start

the wash cycle or pause the wash cycle.

•

If a temporary stop of the wash cycle is

needed, press the

Start/Pause

button.

Display

•

The display shows the settings, estimated

time remaining, options, and status

messages. When the product is turned on,

the default settings in the display will

illuminate.

•

The display shows estimate time

remaining. While the size of the load is

being calculated automatically, blinking

or ‘Detecting’ appears.

•

The RPM may differ depending on the

models.

Programme Knob

•

Programmes are available according to

the laundry type.

•

The lamp will light up to indicate the

selected programme.

Options

•

This allows you to select an additional

programme and will light when selected.

•

Use these buttons to select the desired

programme options for the selected cycle.

•

In order to use the Remote Start function,

refer to SMART FUNCTIONS.

Summary of Contents for F4J7JN Series





















































Search results

Summary of Contents for F4J7JN Series

Reviews:

Related manuals for F4J7JN Series

Brands by name

Popular brands

LG F4J7JN Series, Owner'S Manual

Search results

Summary of Contents for F4J7JN Series

Reviews:

Related manuals for F4J7JN Series

Brands by name

Popular brands