LG F4DV909H2, Owner'S Manual

Page: 29 / 49

28
EN
Woolen Articles
Do not tumble dry woolen articles. Pull them to their
original shape and dry them flat.
Woven and Loopknit Materials
Some woven and loopknit materials may shrink, by
varying amounts, depending on their quality.
Always stretch these materials out immediately after
drying.
Permanent Press and Synthetics
Do not overload your washing machine.
Take out permanent press articles as soon as the
washing machine stops to reduce wrinkles.
Baby Clothes and Night Gowns
Always check the manufacturer’s instructions.
Rubber and Plastics
Do not dry any items made from or containing
rubber or plastics, such as:
•
Aprons, bibs, chair covers
• Curtains and table cloths
• Bathmats
Fiber Glass
Do not dry fiber glass articles in your washing
machine. Glass particles left in the washing
machine may be picked up by your clothes and
cause skin irritation.
NOTE
•
When you turn off the drying cycle of the
washing machine, the drying fan motor can be
operated to save itself for 60 seconds.
• Be careful when removing your clothing from the
washing machine, as the clothing or washing
machine may be hot.
• The estimated drying time varies from the actual
drying time during the Automatic cycle. The
type of fabric, size of the load, and the dryness
selected affect drying time.
• When you select drying only, spinning runs
automatically for energy efficiency.
EcoHybrid
)
Use this feature for air condensing without water
consumption.
1
Press the Power button.
2
Select a drying programme.
3
Press the
EcoHybrid
button for 3 seconds.
4
Press the Start/Pause button.
NOTE
• This feature is available with the Normal or Iron
programme.
Delay End
Use this function to automatically start and finish the
appliance after a specified time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button to set a required
time.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• To cancel the function, the Power button should
be pressed.
•
Avoid using liquid detergent for this function.