background image

37

EN

After cleaning the drain pump filter, take the 

drain pump filter out and insert the drain plug.

Close the cover cap.

CAUTION

 

Be careful when draining, as the water may be 

hot.

 

Run the drum cleaning programme once a 

month (or more often, as needed) to remove 

excess detergent and other debris.

Cleaning the Dispenser Drawer

Detergent and fabric softener may build up in the 

dispenser drawer. Remove the drawer and the 

components of the drawer in the drawer and check 

for build-up of detergents or softeners once or twice 

a month.

Remove the detergent dispenser drawer by 

pulling the drawer straight out until the drawer 

stops.

 

Remove the drawer while pressing the 

disengage button.

Remove the build-up of detergent and softener.

 

Rinse the drawer and the components of the 

drawer with warm water to remove the build-

up from detergent and softener. Use only 

water to clean the dispenser drawer. Dry the 

drawer and the components of the drawer 

with a soft cloth or towel.

To clean the drawer opening, use a cloth or 

small, non-metal brush to clean the recess.

 

Remove all residue from the upper and lower 

parts of the recess.

Wipe any moisture off the recess with a soft 

cloth or towel.

Re-assemble the components of the drawer to 

the proper compartments and insert the drawer.

Summary of Contents for F2V9GCP Series

















































Reviews: