LG F1410SPRE Page 9 Owner'S Manual Download

Page: 9 / 48

■

Removing packing

. Remove the cardboard box and

styrofoam packing.

. Lift the washing machine and remove

the base packing.

. Remove the tape securing the power

supply cord and drain hose.

. Remove the inlet hose from the drum.

. Unscrew the 4 bolts with the spanner

supplied.

. Take out the 4 bolts along with the

rubber bungs by slightly twisting the
bung.

. Close the holes with the caps supplied.

To prevent internal damage during transport, the 4 special bolts are locked.
Before operating the washer, remove the bolts along with the rubber bungs.
If they are not removed, it may cause heavy vibration, noise and malfunction.

■

Removing transit bolts

Transit bolt

Installation

WARNING

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.

There is a risk of suffocation !

Keep all packaging well away from children.

NOTE

• Keep the spanner provided for

future use.

NOTE

• Keep the transit bolts for future use.

Spanner

Washer

Base Packing

Summary of Contents for F1410SPRE

















































Search results

Summary of Contents for F1410SPRE

Reviews:

Related manuals for F1410SPRE

Brands by name

Popular brands

LG F1410SPRE, Owner'S Manual

Search results

Summary of Contents for F1410SPRE

Reviews:

Related manuals for F1410SPRE

Brands by name

Popular brands