manualshive.com logo in svg

LG F12U1QDN0, Owner'S Manual

Share
Download
LG F12U1QDN0 Owner'S Manual Download Page 28

28

• Main wash only 

➔

• Pre Wash + Main Wash 

➔

• Do not exceed the maximum fill line. 

Overfilling can cause early dispensing of the
fabric softener which could stain clothes. 
Close the dispenser drawer slowly.

• Do not leave the fabric softener in the detergent

drawer for more than 2 days.
(Fabric softener could be harden)

• Softener will automatically be added during 

the last rinse cycle.

• Do not open the drawer when water is supplied.

• Solvents(benzene, etc) should not be used.

❿

The dispenser drawer

❿

Adding fabric softener

■

Adding detergent and fabric softener

WARNING

• Keep all washing detergents away from

children 

as there is danger of poisoning.

• Too much detergent, bleach or softener

may cause an overflow.

• Be sure to use the appropriate amount of

detergent.

NOTE

• Do not pour fabric softener directly on the clothes.

Adding detergent

Detergent for

main wash

Detergent for

pre wash

Fabric

softener

Summary of Contents for F12U1QDN0









































Reviews:

No comments

Brands by name

Popular brands

Load more brands