LG F1069FD4F Owner'S Manual Download Page 19

18

PREPARATION

 

u

Check all pockets to make sure that they are 

empty. 

-  Items such as clips, matches, pens, coins, 

and keys can damage both your washer 

and your clothes.

 

u

Close zippers, hooks, and drawstrings 

to prevent these items from snagging or 

tangling on other clothes.

 

u

Pretreat heavily stained areas before 

washing. 

-  Doing so will produce clean, stain-free 

results.

 

u

Combine large and small items in a load. 

Load large items first.

 

u

Large items should not be more than half of 

the total washload.

 

u

The washer can be fully loaded, but the 

drum should not be tightly packed with 

items.  

- The door of the washer should close easily.

 

u

Do not wash single items, except for bulky 

items such as blankets. Make sure to wash 

laundry in similar types of loads. 

-  Washing a single small item may result in 

the tub becoming unbalanced, vibrating, 

making a noise.

 

u

Do not wash waterproof clothes. 

-  This may cause abnormal vibration or may 

cause the load to bounce, which could 

damage the tub.

 

u

Check if there are any other foreign objects 

in the door seal and take extra care that 

clothes do not get caught there. 

-  Foreign objects in the door seal may stain 

clothes, and water may leak if clothes get 

caught in the door seal.

 

u

Wash underwear or small, light items in a 

laundry net. 

-  Small, light items may get caught in the 

door seal, and a brassiere hook may 

damage other items or the tub.

 

u

Brush heavy soil, dust, or hair off fabrics 

before washing. 

-  Laundry may not wash clean if there is 

dirt or sand on the fabrics, or they may be 

damaged due to particles rubbing against 

sheer fabrics.

 

u

Wash blankets individually. 

-  Washing more than one blanket together 

may produce unclean results due to 

tangling or an unbalanced load.

 

u

Always separate fabrics according to their 

colors and wash them separately to prevent 

colors from running. 

-  Fabrics may damage or become stained 

due to fabric dyes running or due to foreign 

objects transferring from one fabric to 

another.

PREPARATION

Precautions for fabric care before wash cycle

Read and observe the following to prevent shrinkage or damage to clothes. 

Summary of Contents for F1069FD4F






















































































Reviews: