manualshive.com logo in svg

LG F1069FD2S, Owner'S Manual, Page: 20 / 44

Share
Download
LG F1069FD2S Owner'S Manual Download Page 20

20

PROGRAMMING MODE

- OPL type -

How to enter "Programming mode"

You can enter programming mode only for Idle state and 
pause state.

- OPL Type

1)  Push the 90°C MEDICAL & 60°C NORMAL button at the 

same time.

2) Push the 75°C HOT button 1  times.
3) Push the START button.
4) Display will show “               ”.

How to use button

You can change Washer vend price, cycle time and Cycle 
parameters, etc.

 :  You can check machine information or change setting on  “Program setup”, “Collect Information Data”, ”Diagnostic Test”.  

PROGRAMMING MODE

Press Button

Description

90°C MEDICAL 

Move to upper level or 

Comes back to Idle State

75°C HOT

Move to the mode in the same level (+)

60°C NORMAL

Move to the modes in the same level (-)

START

Enter the selected mode 

 

NOTE

•  If you turn on the power without connecting meter case for the first time, the machine display “              ”.
• The machine will display “PUSH” for OPL type

Summary of Contents for F1069FD2S













































Reviews:

No comments