background image

17

EN

Using the Fan Speed 

Function

Adjusting the Fan Speed

 

Press 

FAN SPEED

 button repeatedly to adjust the 

fan speed.

Display Screen

Speed

High

Medium - High

Medium

Medium - Low

Low

-

Natural Wind

NOTE

 

The fan speed of Natural Wind adjusts 

automatically.

 →

 

 → 

 

The fan speed icons are displayed on some indoor 

units.

 →

 

 →

 

 →

 

 → 

 

Indoor unit display is displayed only 5 seconds and 

return to the setting temperature on some models.

Using the Air Flow Direction 

Function

This function adjusts the direction of the air flow 

vertically (horizontally).

 

Press 

SWING

(

SWING

) button repeatedly and select the 

desired direction.

 

Select 

(

) to adjust the direction of the air 

flow automatically.

NOTE

 

Adjusting the air flow direction horizontally may not 

be supported, depending on the model.

 

Adjusting the air deflector arbitrarily may cause 

product failure.

 

If you restart the air conditioner, it starts to operate 

with the previously set direction of air flow, so the 

air deflector may not match the icon displayed on 

the remote control. When this occurs, press 

SWING

 

or 

SWING

 button to adjust the direction of the air flow 

again.

 

This function may operate differently from the 

remote control display.

Summary of Contents for F09KM

































Reviews: