16
3 Installation Prerequisites
3.1 Installation materials
These installation materials shall be prepared by installers.
• Charging cable
• Network cable
• Ground wire
• RJ45 plug
• Silicone sealant or putty
NOTE
Make sure that the cross-sectional area of charging cables is 33 to 50 mm
2
.
3.2 Installation location
Make sure that the installation location meets the following conditions:
• The building is designed to withstand earthquakes.
• The location is far away from the sea, to avoid salt water and humidity.
•
The floor is flat and level.
•
There are no flammable or explosive materials nearby.
• The optimal ambient temperature is between 15 and 30°C.
• The temperature and humidity stays at a constant level.
• There is minimal dust and dirt in the area.
• There are no corrosive gases present, including ammonia and acid vapor.
NOTE
The RESU battery pack is rated at IP55 and thus can be installed outdoors as well as
indoors. However, if installed outdoors, do not allow the battery pack to be exposed to
direct sunlight and moisture.
NOTE
If the ambient temperature is outside the operating range, the battery pack stops
operating to protect itself. The optimal temperature range for the battery pack to
operate is 15°C to 30°C. Frequent exposure to harsh temperatures may deteriorate the
performance and lifetime of the battery pack.
Summary of Contents for EH048252P3S1
Page 49: ......
