25
Appendix
4
Appendix
Maintenance
Cleaning the product
To clean this product, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution. Do not use strong solvents such as alcohol, benzene, or thinner, as these might
damage the surface of the product.
Do not use volatile liquids such as insecticide spray near this product. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic products in contact with the product for a long period of
time.
When cleaning the air duct, shut off all the systems including PCS, PV module, battery, AC circuit breaker. After
that, open the lower cover of the PCS and remove dust on the air duct using a soft brush.
Inspecting regularly
It is recommended to check the operating status and connection status once a year. Contact authorized dealer
or where you purchased.
Contact
If you have technical problems or questions, contact installation company or LGE.
1. Installation Company
Address :
Tel :
2. LGE
Address : LG Electronics Deutschland GmbH
Berliner Straße 93
40880 Ratingen
Germany
Tel. : + 0049 18 06 807 020
E-Mail: [email protected]
Appendix
