15
Install
ation
2
Installation
D
Assemble the upper wall bracket and middle
wall bracket and ix it with screw.
E
Assemble the lower wall bracket and middle
wall bracket. And indicate the positions to drill
using a pencil or the like.
After making indications, disassemble the
lower wall bracket.
F
Drill holes on the indicated positions and
attach the anchors.
WARNING
It is important to ensure the drilling locations
are not located on any electrical wiring within
the wall.
NOTE
When attaching the wall bracket to a wall,
adjust the horizontal level using inclinometer.
G
Assemble the lower wall bracket and middle
wall bracket. And ix the lower wall bracket
with screws.
NOTE
y
Before ixing the bracket screws, check
the horizontal level once again using
inclinometer.
y
Depending on the surface, different screws
and anchors may be required for installing
the wall brackets. Therefore, these screws
and anchors are not content of the product.
The system installer is responsible for
selecting the proper screws and anchors.
y
It is recommended to use stainless steel
screws with diameter of 6-8 mm.
