62
Cleaning by hand
Note:
Allow the oven to cool down before cleaning.
Danger of
burning!
The oven and accessories should be cleaned after each use.
Otherwise cleaning the next time will become more difficult
and in extreme cases impossible!
Cleaning process:
The catalytic enamelled back panel should be cleaned using a
solution of hot water with a little washing up liquid applied with a soft
nylon brush.
If, after manual cleaning, the oven is still heavily soiled, heating it to
a high temperature will help remove further soiling caused by oil and
grease splashes from the catalytic surface.
Cleaning at high temperatures:
- Remove all accessories (baking trays, wire grille) from the cavity.
- Turn the oven selector to CONVECTION.
- Turn the temperature selector to the highest setting.
Run the oven for approx. 1 hour. The length of time will depend on
the level of soiling. Any remaining soiling will gradually disappear
with each subsequent use of the oven at high temperatures. It is a
good idea to set the finish time for the process using the timer.
This way you will not forget to switch the oven off at the end.
Note:
Should the catalytic enamelling on the back panel and side
panels (if fitted) become ineffective through improper use or
heavy soiling, a replacement can be obtained from your LG
Dealer or the LG Service Center.
Cleaning and care
