14
Auto setup
Adjust the programmed channels
Press HOME, then use
b
b B
B
to select [Easy Menu] option. Press ENTER while
[SETUP] is selected. The SETUP menu appears on the screen. Select the
[Program Edit] on the second level options then press
B
B
to move to the third
level. Press ENTER while [Edit] option is selected. The channel editing screen
appears on the screen.
Select which channel you would like to edit and press ENTER. An option menu
on the left side of the screen will be highlighted.
[Favourite] Set the program to favourite channel.
[Delete]: Delete the selected channel from programmed channel list.
[Move]
(Analog channel only): Change the order of the channels and which
numerical button they correspond to.
[Block] Blocks the program.
[Station Rename]
(Analog channel only): change a name of the selected
channel.
[Program Edit]
(Analog channel only): Change the settings of a channel
manually.
Editing a channel (Analog channel only)
You can change the settings of programmed channel by selecting [Program
Edit] option on the left side of the channel editing screen.
[PR]: Indicates the selected channel position.
[Seek]: Searches for a channel automatically. Searching stops when the unit
tunes in a channel.
[Ch.] Changes the channel number.
[MFT] Fine tunes the channel to obtain a clearer picture.
[NICAM]: Sets the channels for the NICAM broadcast.
[OK]: Confirm the settings and return to the channel list menu.
Auto setup
1
Turn on the unit:
POWER
The initial setup wizard appears on the screen.
2
Choose a language:
v
v V
V
3
Select the chosen language:
ENTER
4
Check the antenna and go to the next step:
ENTER
5
Choose a clock setting mode:
v
v V
V
6
Select the chosen clock setting mode:
ENTER
7
Set the clock:
v
v V
V b
b B
B
,
This step is not available for Auto mode
ENTER
8
Choose a broadcasting type:
All or Analog
B
B v
v V
V
9
Select the [Start] and starts channel scan:
B
B
ENTER
10 Close the initial setup:
ENTER
ON REMOTE
When the first time to turn on the unit, the initial setup
wizard sets the language, clock and channels
automatically.
DR386D-W.BAUSLLK_ENG 6/16/08 10:38 AM Page 14
