Enjoying in a car with the
Headrest Mounting Bracket
You can enjoy video in the back seat attaching the
unit to the back of the front seat.
Warnings
• The driver must not operate this unit while the
vehicle is moving.
Do not operate this unit where it can be viewed
by the driver.
Driver operation or viewing of this unit while the
vehicle is moving will cause distraction which
may result in serious accident and personal
injury or property damage.
• Do not attach or detach while driving, and do not
attach in the following locations, otherwise it may
result in injury or traffic accidents:
– anywhere other than the back of the seat
– in a location that interferes with the driver
ʼ
s
view or operation of the car
– in a location that interferes with the operation
of an airbag
– in a location that interferes with the driving
instruments.
•
Depending on the type of headrest, you may
not be able to attach the bracket.
Headrest Mounting Bracket
a
Fixing Screw
Fixes the unit on the bracket.
b
Tilt Fixing Screw
Fixes a tilt angle of the bracket.
c
Horizontal Fixing Screw
Fixes a horizontal angle of the bracket.
d
Release knob
Press both knobs to release the bracket body
from the cradle.
e
Headrest Mounting Cradle
Installation
a
Separate the headrest.
(Refer to your car
ʼ
s
user guide.)
b
Install the headrest
mount cradle as shown
in the figure.
Note: If you may not be
able to install the headrest
cradle because of the pipe
thickness of your headrest,
extend the headrest cra-
dle loosing its screws and
install it.
c
Put the unit on the
bracket and fix it using
the fixing screw.
d
Fit the bracket body
fixed the unit to the cra-
dle.
e
Adjust the horizontal
and tilt angle of the
bracket and enjoy the
unit.
22 cm
or
less
