36
OPERATION
Using the Lg EasyLoad
TM
Swing Door
Use the swing door when unloading, or when loading
bulkier items, for easy access to the drum.
To open the swing door, grasp the top of the door on
the side opposite the hinge and pull.
NOTE
Make sure the hamper door release is completely
closed before using the swing door.
Swing door
Interlock
Buttons
WARNINg
Do not press the three interlock buttons when
the door is open. The door may fall off and cause
serious injury.
•
Do not place heavy items on or lean against
the top of the door when it is open.
The dryer could tip forward, causing injury or
property damage.
hamper Door (on some models)
Use the hamper door when loading. The hamper door
opens about 40 degrees and acts as a chute to help
guide items into the drum and help prevent items from
falling onto the floor. It also comes in handy when
unloading a few small items, helping prevent the rest
of the laundry from being pulled onto the floor.
To open the hamper door, press the release on the
top of the door and pull the door forward.
Make sure laundry is fully inserted in the drum before
closing the door.
NOTE
Make sure the swing door latch is completely
closed before pressing the hamper door release.
Hamper door release
40°
Hamper door
WARNINg
•
Do not attempt to pull the hamper door open
more than 40 degrees.
•
Be careful when opening and closing the door.
Fingers and hands can get caught in the door
and cause injury if the door drops forward
unexpectedly.
MFL69702004_en_170105.indd 36
2017-01-05 �� 3:29:46
Summary of Contents for DLEY1901 E Series
